Dial caliper is a very handy and convenient dimension measuring tool. It can measure outer diameter, inner diameter, thickness, Step and depth.Steps for using a caliper: 1. Clean the panel before measurement..2. Close the jaws and check that the indicator points to "0" on the dial face.If caliper doesn't zero, loosen the bezel clamp screw and rotate the bezel to the "0" position.Tighten the be...

Block Dimension range(mm) Plane view(mm) Parallelism(mm) Perpendicularity(mm) 0.5≤L≤10 +/-0.03 +/-0.03 0.3 degree for adjacent sides 10≤L≤50 +/-0.03 +/-0.05 L＞50 +/-0.03 +/-0.1 Disc Dimension range(mm) Cylindricity(mm) Tolerance(mm) Parallelism(mm) 1≤D≤5 +/-0.02 +/-0.02 +/-0.02...

Thimble- The thimble rotates around a cylinder which is marked in millimeters- The left-hand side of the thimble has markings all around it- The line labeled 0 is the primary pointer.Close the jawsCalculate the least countPlace the object between the two jaws (Anvil andspindle), Spin ratchet until you hear 3 clicks.Record the position of main scale where the twomeasuring rods metNot...

The limits include:60mm max in magnetized direction170mm max diameter for discs and rings170mm max length and width for blocks0.35mm minimum on thickness on any magnet1.58mm minimum diameter on outer diameter1.58mm minimum diameter on any hole